Using long division can be a challenge if you don’t know how to do it well. In this article, we will teach you how to calculate 500 divided by 100 using long division.
What you can expect to learn:
- How to use long division to calculate 500 divided by 100
- How to do the calculation faster so that you don’t spend too much time on it
- The main rules to apply when calculating any divisions using long division
Now that we have set our objectives for this exercise, let’s proceed to do it!
Understanding the parts of the 500 divided by 100 calculation:
You need to know which numbers are involved here and in what capacity.
- The number that is being divided is 500 and is called the dividend.
- The second number that is being divided by is 100 and is called the divisor.
- The result that we shall get after doing the calculation is called the quotient.
Now that we understand the parts of our division, we can go ahead and start doing the maths.
500 divided by 100 step-by-step process:
Step 1:
We begin by setting up our divisor on the left side and the dividend on the right side. Here is how:
100⟌500
Step 2:
The divisor (100) goes into the first digit of the dividend (5), 0 times. Why?
It’s simple. You ask yourself, can you put 100 into the first digit 5? You can’t. So if you can’t, then the answer is 0.
So we put 0 at the top as below:
0
100⟌500
Step 3:
We multiply the divisor (100) by the result (0) in the previous step.
100x 0 = 0
We put the 0 below:
0
100⟌500
0
Step 4:
Now we have to subtract the result from the previous step (0) from the first digit of dividend.
5 – 0 = 5
We put the answer in our calculations as shown below:
0
100⟌500
– 0
⏤⏤
5
Step 5:
Next, we need to pull the second and third digits of the dividend down as well. So it looks like this:
0
100⟌500
– 0
⏤⏤
500
Step 6:
Since we were not able to put 100 into 5 in our step 2, we will now try to put 100, our divisor, into 50.
The question to ask is, how many times can 100 go into 50?
The diviser, 100, can go into 50, 0 time(s).
So we add 0 into the quotient as below:
00
100⟌500
– 0
⏤
500
Step 7:
We multiply the divisor 100 by the result in the previous step.
100 x 0 = 0
Then we add the answer to our division process like shown below:
00
100⟌500
– 0
⏤
500
0
Step 8:
Now we have to subtract our result in the step above from the number above it.
In this case 50 – 0 = 50
See below:
00
100⟌500
– 0
⏤⏤
500
– 0
⏤⏤
50
Step 9:
Next, we need to pull the third digit of the dividend down as well. So it looks like this:
00
100⟌500
– 0
⏤⏤
500
– 0
⏤⏤
500
Step 10:
Since we were not able to put 100 into 50, we will now try to put 100, our divisor, into 500.
The question to ask yourself is, how many times can 100 go into 500?
The diviser, 100, can go into 500, 5 time(s).
So we add 5 into the quotient as below:
005
100⟌500
– 0
⏤⏤
500
– 0
⏤⏤
500
Step 11:
We multiply the divisor 100 by the result in the previous step.
100 x 5 = 500
Then we add the answer to our division process like shown below:
005
100⟌500
– 0
⏤⏤
500
– 0
⏤⏤
500
500
Step 12:
Now we have to subtract our result in the step above from the number above it.
In this case 500 – 500 = 0
See below:
005
100⟌500
– 0
⏤⏤
500
– 0
⏤⏤
500
500
⏤⏤
0
What is the answer to 500 divided by 100?
Because we don’t have any other digits to pull down from our dividend, the 0 at the end of the step above sums up the last step of our calculations.
The answer to 500 divided by 100 is the quotient, 5, that we got above.
You can do 500 divided by 100 using other ways like:
-
A calculator
If you typed in 500÷100 on a calculator you will get 5 as the result.
-
Mixed Fraction
If you divided 500/100 and wanted the answer as a mixed fraction, your answer will be 5 0/100 where 0 is the remainder, 5 is the quotient and 100 is the divisor from our calculations in step 8 above.